|
We offer a reliable triple exhaust system for the Mach Z 800. With a set of these pipes you will feel the supply of 175 hp while the rpm climbs to 9100 rpm. The pipes fit neatly into the CK3 (or F) chassis with our oversized silencers that exit out the stock location. Ball socket flanges allow for tight sealing while enduring a long life. There is an impressive weight reduction of 25 lbs. No one should sacrifice the tremendous throttle response and the 20 hp top end increase that is typical with these pipes. We recommend installing a set of 'V-Force' reeds and making some jetting and clutching changes. If you favour the extreme performance of a drag set-up, the capabilities of these pipes will dramatically exceed 175 hp. These specifications also describe our pipe on the Formula III 800 and the Grand Touring 800. |
Our
Mach Z pipes top the market! Want specifics? Check
out
our
numbers.
94-96 Ski-Doo MACH Z 780 Pipes
| If you are
still hanging onto the older generation of Mach Z, we offer pipes for
you as well. The rpm stay down as we achieve an added 10 hp over stock.
These lightweight pipes are precisely tuned for immaculate performance and
trail ability. Other than the installation of the pipes, there is
absolutely no adjustment's to be made. We allow for the option to have
these pipes fit into the stock canister, or they can be requested with a
set of Jaws silencers for some extra weight savings. |
|
We are
extremely proud of the performance these pipes deliver. Check out
our numbers and you will understand
why.
Ski-Doo Summit 670 - Summit X 670 pipes
|
Looking
for a power increase for your Summit 670 - Summit X 670? With a set
of Jaws pipes you will experience exceptional performance bottom and top
end. We packed 12 more hp into these pipes, so hold on. However there is
some bad news about these pipes, they are only available for 2500 ft and
above, sorry low altitude riders. The rpm peaks out at 8200-8300 rpm.
There are obligations to some basic jetting and clutching.
THESE
ARE THE MOST POWERFUL AND DEPENDABLE SUMMIT (X) PIPES ON THE MARKET!
|
00-02 Ski-Doo MXZ 700 - Summit 700 pipes
Looking
to pounce all over the lake competition or how about landing at the top of
the mountain well ahead of your buddies. Our MXZ/Summit 700 were designed
to achieve maximum performance. This exhaust system generates 10 hp
over stock, while operating in the range of 8200-8300 rpm. A Jaws head
will accompany this exhaust system. We recommend some minor changes
to jetting and clutching.
Jaws
Triple Pipes in an 'S' or 'ZX' Chassis
If you love the strength of the Mach Z triple engine, but also love the weight and handling of a twin chassis. Then our pipes are exactly what you need to complete this package. This concept is becoming extremely popular and we here at Jaws have been doing this for years. Finally a comfortable trail friendly chassis can produce 175 hp plus.
Jaws Triple Pipes in the REV Chassis
We did it! For anyone who dropped the Mach Z motor in the Rev chassis, then we have the pipes for you. We fit our awesome power hungry triples in there. Tight fit but the masters here at Jaws are able to do it. Pipes are available for the 800 and 1000 versions. Check out http://www.bondiengines.com for the motor mounting hardware.
Arctic Cat '07-'08 M 1000 Twin Pipes Here they are! A lightweight set of twins that add an easy 25 hp while maintaining the stock rpm to your M1000. These powerful pipes see a tremendous increase throughout the entire power band while removing weight. A fuel control system and clutching adjustments are required. They are silenced with our lightweight twin mufflers. They are recommended for 3000 ft and above. Low elevation and F1000 pipes coming soon. Porting package for even more power also available, courtesy of Arctic Edge Motorsports 403-564-4673.
Jaws M1000 Twins
Click on image to enlarge
Arctic Cat '07-'08 M-8 Twin Pipes Reaching peak power at 78-7900 rpm the twins are the must have for any M-8. A reliable set of pipes that are easily tuned. They include our popular twin silencers that allows for a lightweight, great sounding system that exits out the stock hole.
Arctic Cat '05-'06 M7 Twin Pipes Our twin pipes for the M7 for high altitude (above 3500 ft.) are loaded with 15+ hp and reach peak power at the stock rpm. For extreme elevations (10,000ft+) we offer our M7 HA. All systems reach peak power at 78-7900 rpm and add an amazing 6-7 mph track speed increase. We tuck the pipes neatly under the hood and silence them with two single muffler options and both exit through the stock location. One being our lightweight option. This system weighs 7 lbs less than stock. The other option being our 'quiet as stock' muffler. All these pipes require are some simple clutch weight adjustments. There is no fuel control box required for the '05 models however we do recommend a fuel control box with the '06 models. Don't miss out. Order a set today.
We also offer twin pipes for the M8, F8, M9 and F9 packages to fit in the M7 or F7 chassis. See below for more information.
Jaws M7 pipes
Click on image to enlarge
We offer a powerful set of pipes for any of the M8 and M9 big bore kits out there. Our durable pipes are packed with the most hp on the market. These reliable twins are fitted to the M7 chassis with our long life single canister that exits through the stock location. The pipes do vary between the 800 and 900. These pipes reach peak power at 78-7900 rpm.
Did you put a 800 or 900 big bore package on your your F7? If so we have the perfect set of pipes to achieve your maximum hp. These twins are fit to the Firecat 700 chassis with our long life single canister. The pipes do vary between the 800 and 900. These pipes reach peak power at 78-7900 rpm.
If full mod is your forte, then we have an awesome set of twins to compliment your F6 or F7. Spinning at 9300-9500 rpm and running on race fuel we guarantee that with our pipes will help you achieve the most power possible from your tricked out F7. Check out other race pipes..
We also
'98-'02 Arctic Cat Thundercat 1000 Pipes
| We packed tons of horsepower into these pipes, 20 to be exact. The top end speed is increased immensely as the Thundercat tops out at almost 190 hp while maintaining the rpm's between 8400-8600. We recommend the accompaniment of a set of 'V-Force' reeds as well as crankcase modification (that can be done here at Jaws). We utilize an extra large set of silencers that offer a quiet throaty sound. Check out these sharp looking pipes in our CAT 1000 pipe "photo album". There is no doubt that this exhaust system will help to put you onto the jealousy list of your buddies or the hate list of your competitors. We now offer a 3 into 1 single muffler that keeps these pipes even quieter. |
|
Our numbers say it
all.
Arctic Cat Thundercat 1000 in ZR chassis
If you
dropped a powerful Thundercat engine into the lighter more mobile ZR
chassis, then we have the pipes for you. These pipes offer the
exact same specifications (20 hp increase) that flows custom with our Thundercat
exhaust systems. These pipes fit comfortably under the hood and exit
out the stock location.
Our pipes offered for the Mountain Cat 900 in the mountains became available in early 2003. Since then they have become very popular, we can't seem to keep them stocked. They offer tremendous throttle response and reach peak power at 7900 rpm. The twin pipes flow into a single canister that has deep exhaust note and exits easily out the stock location (please specify year as outlet locations do vary). This exhaust system functions best at altitudes above 2500 ft.
CClick image to enlarge
Arctic Cat Big Bore Twin Pipes
Known as the 'D' pipes, that we later labeled the dominator set as that is exactly what they are doing, dominating the competition. These twins are offered with a quiet muffler box are compatible with many of the big bore top end kits for the ZR/MC 900 on the market. Don't settle for just any set of pipes, go for the best.
''01-'03 Arctic Cat ZR 800 Pipes
|
We
manufacture a strong set of twin pipes for the ZR and Mountain Cat 800. Our
pipes work exceptionally well on both the carburetor or EFI version. Low-end,
mid-range and top-end these pipes offer an increase of 9 hp. There
is some easy jetting and clutching required. The pipes are silenced with
our over-sized twin canisters or our single canister. There is no
doubt that these are the dominant 800 twin cat pipes on the
market.
|
'99
-'00 Arctic Cat ZR 700 Pipes
| Looking to make a good machine that much better? We have the answer. Our twin pipes for the ZR 700 (or Powder Special 700) offers a 9 hp increase over stock and operates at 7800-7900 rpm. Bolt on a set of our pipes and watch your ZR 700 come alive. The performance numbers confirm the abilities of these pipes. You'll like the field-proven, crisp throttle response that these pipes deliver. |
|
'98 Arctic Cat ZR 600 Pipes
|
Check out our our Arctic Cat 600 Pipes. Performance is what these pipes are all about. Our pipes add another 13 hp over stock and operate at 8300 rpm. The changes we recommend to jetting and clutching are minimal. We sweated the details to make sure that our 600 pipes produce more horsepower than anyone else's, in the industry, period. |
P O L A R I S
| Like
all of our pipe sets, the units we've designed for the Polaris 700 deliver
real out-of-the-box performance. If you know which end
of a socket wrench to hold, you should be able to install our pipes yourself,
in minutes...and be rewarded with a 13 hp increase in peak performance. We
suggest some jetting, clutching and head adjustments. These specifications
also describe our RMK 800 pipes.
|
|
Y A M A H A
| Powerful,
durable and unbeatable are just a few words that describe our Viper pipes.
Our Viper pipes were specifically designed for the Viper and boy they
ROCK. The rpm climbs too almost 9000 as you experience the extra 22+ hp we
packed into this exhaust system. We utilize ball socket flanges for
sure sealing, and long life insurance. The sound of these Viper pipes is
quiet yet sporty. Employing a mostly stock clutching, stock reeds and
stock heat exchanges these become the most friendly pipes on the
market.
We have had absolutely no issue of burn down or overheating with our pipes on the Viper as we regret to say has become an issue with our competitors pipes for the Viper (we held it wide open for 30 miles just to make sure). Trust us you will not regret purchasing a set of these pipes. Want the bottom line? Check out the performance numbers. |
|
Phone:
613-489-5297 Fax: 613-489-2199 Email:
jaws@bellnet.ca
Also Available:
MACH
1 700
Formula III 600
Formula III 700
Formula III 800
Summit 583 (H.A)
Custom race pipes